Page 1 of 2
RT125 stripping
Posted:
Thu Jul 22, 2010 2:31 pm
by Bertie
my MZ RT125 has just been written off, CAT C, front impact. main damage is bent forks and a few other peices. otherwise the bike is in excellent condition
bike is 2008, engine on around 8000 miles and is undamaged, was serviced about 4 miles before the accident!
anyone interested in any parts? should have the bike back at my house next week and am willing to post pretty much any of it!
Re: RT125 stripping
Posted:
Sat Jul 24, 2010 9:57 pm
by stephendacosta
I know the shipping will be rediculous, but give me prices on the insturment cluster,speedometer cable, lower fork legs, and rear shock.---Steve
Re: RT125 stripping
Posted:
Sun Jul 25, 2010 12:09 pm
by mzsrus
tex me, i be interested, 0777 9012019
brecon and zschopau andy
Re: RT125 stripping
Posted:
Mon Jul 26, 2010 4:34 am
by Bertie
stephendacosta wrote:I know the shipping will be rediculous, but give me prices on the insturment cluster,speedometer cable, lower fork legs, and rear shock.---Steve
lower fork legs were quite bent in the accident and the instrument cluster bracket was also bent, although i believe the instrument cluster should be ok
i honestly have no clue what any of those parts are worth. Honda CBR125 shocks go for about £100 on ebay, so maybe £80 plus postage? instrument cluster maybe £35 plus postage? speedo cable probably worth a fiver?
Re: RT125 stripping
Posted:
Mon Jul 26, 2010 4:35 am
by Bertie
mzsrus wrote:tex me, i be interested, 0777 9012019
brecon and zschopau andy
what parts might you be interested in?
Re: RT125 stripping
Posted:
Thu Jul 29, 2010 4:23 am
by mzsrus
Engine, carb, starter clutches, swingarm.
Re: RT125 stripping
Posted:
Thu Jul 29, 2010 11:52 am
by Bertie
all of those parts are available. i dont know how much they are all worth really, make an offer on them!
Re: RT125 stripping
Posted:
Sat Jul 31, 2010 4:49 pm
by Bertie
the bike is back in my garage so all parts are available.
as it turns out engine is on about 6800 miles, not 8000 like i thought!!
Re: RT125 stripping
Posted:
Sun Aug 01, 2010 10:17 am
by stephendacosta
Bertie wrote:stephendacosta wrote:I know the shipping will be rediculous, but give me prices on the insturment cluster,speedometer cable, lower fork legs, and rear shock.---Steve
lower fork legs were quite bent in the accident and the instrument cluster bracket was also bent, although i believe the instrument cluster should be ok
i honestly have no clue what any of those parts are worth. Honda CBR125 shocks go for about £100 on ebay, so maybe £80 plus postage? instrument cluster maybe £35 plus postage? speedo cable probably worth a fiver?
So, I would like both the insturment bracket/cluster, speedo cable and the rear shock at those prices. Do you have paypal? Please find out the cost of posting. Your sure the lower legs are both bent? Usually the fork tubes bend and not the lower leg itself. I do not have texting; use my email for contact
huntdacosta@roadrunner.com. My address for post cost is
18854 Snyder Road, Chagrin Falls, OH 44023 USA---Steve
Re: RT125 stripping
Posted:
Sun Aug 01, 2010 11:24 am
by Bertie
im not 100% sure both the lower legs are bent. on the right hand side you can fit your fingernail between the fork seal and the lower leg and it is definately dented just at the seal.
i had a quite look at prices for postage to the US and the cheapest came back at about £70, making it £190 overall. that was just taking a guess at size and weight, its not an accurate price. if you are still interested i can get a more accurate figure
Re: RT125 stripping
Posted:
Tue Aug 03, 2010 5:02 pm
by stephendacosta
Still interrested. Let's make a deal.You did not answer about paypal, or I could post you a check. email
huntdacosta@roadrunner.com Include the lower legs, repair sounds possible.If using DHL for shipping is an option, that would save weeks of delay in the import section of our post office.---Steve
Re: RT125 stripping
Posted:
Wed Aug 04, 2010 9:12 am
by Bertie
stephendacosta wrote:Still interrested. Let's make a deal.You did not answer about paypal, or I could post you a check. email
huntdacosta@roadrunner.com Include the lower legs, repair sounds possible.If using DHL for shipping is an option, that would save weeks of delay in the import section of our post office.---Steve
seeing as you are still interested i will strip the parts off my bike, weigh them and produce a more accurate figure for you. i wont be able to do this until the weekend at the earliest though. if you cover postage for the fork legs i will throw them in free, seeing as i cant gaurantee their straightness or usability
my email address/paypal address is bertiegalliford (at) hotmail (dot) com
Re: RT125 stripping
Posted:
Fri Aug 06, 2010 2:18 pm
by Bertie
exhaust silencer definately gone. rear shock, instrument cluster, speedo cable and lower fork legs are going. everything else is still up for grabs people
Re: RT125 stripping
Posted:
Sat Aug 14, 2010 12:11 pm
by Bertie
no one want any parts?
Re: RT125 stripping
Posted:
Thu Aug 19, 2010 6:09 am
by Bertie
the bike is still here with loads left on it. im willing to post anywhere in the world (recently posted rear shock, lower fork legs and instrument cluster to Ohio problem free)