scottoiler
Posted: Mon Mar 16, 2009 5:50 pmJust fitted a scottoiler. what a bugger to fit the vacuum manifold inlet , thought i was going to break something.
looking back on it afterwards it wasn't as bad as it first looked and a good way to get to know the bike. Found a few bits of rust on cables etc that i was able to fix before they got worse.
After taking the airbox off ,slackening the two jubilee clips to the inlet manifolds and removing three breathers to the airbox i was crapping myself that i was going to break an injector.
I'll try and post some pics if they might be of help .
The forum will only let me post 3 pics sorry.
looking back on it afterwards it wasn't as bad as it first looked and a good way to get to know the bike. Found a few bits of rust on cables etc that i was able to fix before they got worse.
After taking the airbox off ,slackening the two jubilee clips to the inlet manifolds and removing three breathers to the airbox i was crapping myself that i was going to break an injector.
I'll try and post some pics if they might be of help .
- underside of inlet manifold
- DSC01265.JPG (47.21 KiB) Viewed 2023 times
- rubber inlet manifold removed
- DSC01257.JPG (47.29 KiB) Viewed 2021 times
- fuel injector assembly
- DSC01256.JPG (59.95 KiB) Viewed 2020 times
The forum will only let me post 3 pics sorry.