Baghira oil change

[duncmac]

Did the oil yesterday.

There was no washer or oring on the sump plug. What size oring goes there?

Wasnt leaking, bit hard to undo though, used a copper washer instead.

Same for the frame/course filter. No washers, done up extra tight. What should be here, metal washer or rubber washer?? Any idea on sizes?

[den]

hi mate , i drained the frame oil via the banjo at the bottom of the frame tube,,banjos always need a copper washer,,top and bottom,,the sum plug bolt will need one as well as this helps it to seal and stops it from seizing,

[duncmac]

Hmm none present when I pulled the frame tube pipe.

Just done up extra tight.

Does anyone know the size?

Otherwise I'll ring up grahams.

[den]

oil line for baggy

[duncmac]

Cheers Den

Cant find any 16 x 12 washers so have emailed grahams spares to see if they can advise or provide.

[den]

Cheers Den

Cant find any 16 x 12 washers so have emailed grahams spares to see if they can advise or provide.

most oil line banjos are of a standard ,just go to any car motor factors and ask for copper washers, cheap as chips, i think i remember seeing some in halfords,,sump plug washer 16 x 12

[duncmac]

Cheers, but cant see any 16x12's plenty of 16x20's though