In the process of repairing what was my Sport Cup into something that is no longer a sport cup (no fairing).
I want to mount a mirror into the boss on the Grimeca Master Cyl for the purpose, anyone any idea what the thread size is ?
Is it M10 fine pitch or something odd? Nothing I have seems to fit.
Thanks.
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
Mirror thread size
Moderators: DAVID THOMPSON, phlat65
4 posts
• Page 1 of 1
Mirror thread size
by Andy_C » Sun Feb 21, 2016 3:04 pm
- Andy_C
- Posts: 344
- Joined: Sun Mar 02, 2014 9:02 am
- Location: Somerset
Re: Mirror thread size
by owene » Mon Mar 07, 2016 1:43 pm
The standard thread for mirrors should be M1.5 x 10, same for ETZ250.
Use a thread caliper
Use a thread caliper
MZ ETZ250
-
owene - Posts: 4
- Joined: Sun Dec 16, 2012 6:18 pm
- Location: Brasov, Romania
Re: Mirror thread size
by Petrolhead » Mon Mar 07, 2016 1:59 pm
Have a look at your previous posts< I posted two replies there with the info you need 
- Petrolhead
- Posts: 62
- Joined: Wed Dec 16, 2015 4:41 pm
- Location: Inner Hebridies
Re: Mirror thread size
by ericetz301 » Mon Apr 04, 2016 9:18 am
I think it`s a Yamaha system used where it`s a LEFT hand thread on one side, ( so you have to use Yammy mirrors) cunning A!
there are adapter / converters on Ebay for a < a fiver.
Eric.
there are adapter / converters on Ebay for a < a fiver.
Eric.
- ericetz301
- Posts: 43
- Joined: Tue Jun 19, 2012 4:43 am
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: Bing [Bot] and 65 guests