MZ/MuZ Riders

A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.

Skip to content

Anyone replaced a Baghira clutch yet

Black Panther/Street Moto, Baghira, Enduro, Mastiff, Skorpion Traveller and Tour.

Moderators: DAVID THOMPSON, phlat65

Write comments

Anyone replaced a Baghira clutch yet

Postby Atomtan » Wed Oct 12, 2005 7:40 pm

Just curious as to what part companies offer aftermarket, and of course part numbers.
Atomtan
 
Posts: 8
Joined: Thu Jan 20, 2005 10:37 am
Top

Postby phlat65 » Thu Oct 13, 2005 1:11 am

barnett probably has one, they have clutches for EVERYTHING!!!!!

I would go stock, it probably is not too bad cost wise, maybe yamaha can order for us?
2001 MZ Black Panther
2001 Suzuki RM125 (full Enduro)
Old Hondas- TT500 Ascott, 305 Dream Touring
User avatar
phlat65
Moderator
 
Posts: 735
Joined: Thu Nov 13, 2003 1:05 am
Location: Seattle
Top

Postby keithcross » Thu Oct 13, 2005 12:41 pm

If you live in the UK M&P sell clutch kits and springs. Friction plates £47.99 and £8.99 for the springs.

Dougal
Ride it like you stole it
keithcross
 
Posts: 922
Joined: Thu May 20, 2004 1:35 pm
Location: Hampshire England
Top

Postby Atomtan » Mon Oct 17, 2005 12:12 pm

Well I have found this-

Which also has online fiche!!

Yes -Barnett does make a clutch for the RAPTOR. I am hoping that for the most part it is all the same on the inside.


http://216.37.204.202/yamaha_oem/YamahaATV.asp?Type=12&A=194
Atomtan
 
Posts: 8
Joined: Thu Jan 20, 2005 10:37 am
Top

Postby keithcross » Mon Oct 17, 2005 1:17 pm

I would say the clutch as shown is the same as the baggit. The pictures look the same, right down to the numers idicating each part :) :)

Keith
Ride it like you stole it
keithcross
 
Posts: 922
Joined: Thu May 20, 2004 1:35 pm
Location: Hampshire England
Top
Write comments

Return to 660 cc

Who is online

Users browsing this forum: No registered users and 286 guests



www.MZRiders.com ©lostblur
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group