Black Panther/Street Moto, Baghira, Enduro, Mastiff, Skorpion Traveller and Tour.
Moderators: DAVID THOMPSON, phlat65
by boofbee » Sat Apr 04, 2009 6:54 am
The water pump on my 99 Skorpion Sport has an intermittent leak from what appears to be a drain hole underneath the pump. Only seems to happen when I give the bike the beans (which is most of the time)! Any similar experiences/remedies? Cheers.
-
boofbee
-
- Posts: 5
- Joined: Tue Nov 04, 2008 2:50 pm
by DAVID THOMPSON » Sat Apr 04, 2009 11:59 am
test thermostat ---if not open when you squeeze the beans out of it pressure may cause seal to weep or leak
dave
and always a good idea to let it warm up a bit before flogging the crap out of it
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON
- Moderator
-
- Posts: 5162
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
by aah5 » Sun Apr 05, 2009 2:02 am
Waterpump seal has been the only fault I have ever had with my Skorpion, there is an starndard oil seal and a ceramic face seal that relies on a spring and coolant pressure to do its job.
I replaced the seals with a Yamaha part from a (RZ350?) as the seal is not a separatly listed part for the XTZ but is for other Yamaha models just takes a bit of research.
But for a start just remove the water pump and clean out the area between the seals as any coolant leak tends to dryout in there and crystalise causing the faceseal not to seat properly.
Bought a replacement pump later and fitted that but the old one is still OK.,handy to have plenty of spares.
-
aah5
-
- Posts: 76
- Joined: Wed Apr 16, 2008 7:27 pm
Return to 660 cc
Who is online
Users browsing this forum: Bing [Bot] and 154 guests