Baggy fork spring replacement

[CasterTroy]

Is there any special technique for removal of the stock fork spring and replacing it with a stiffer spring?

Is it simply removing the upper plug and pulling the cap, and spring guide out? Do I need to back out the screws in the cap top? or just leave everything in place and remove the top cap as one piece?

[rodge70]

seem to remember that you need to unbolt the spring from the cap, can't quite recall exactly what but when i done my mates fork oil last summer i had to seperate the cap may have been from damper and rebound tubes, i know its self explanatory when you see it.
there is the service info on here somewhere i think as well.

[MSW]

This should be all you need:

http://home.pacbell.net/adw_msw/Front_Forks_Manual.pdf

Good luck!