Hi,
as topic says, can anyone remind me of exhaust, and inlet valve cleareances.. ?
also did read somewhere that by giving bit more clearance, that engine will be a bit more peppy..
standard clearances please
Alun
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
valve clearances please.. 660 baghira ?
Moderators: DAVID THOMPSON, phlat65
5 posts
• Page 1 of 1
valve clearances please.. 660 baghira ?
by handsomejackuk » Thu Sep 03, 2009 5:26 pm
I'm a schizophrenic so am I !!!!
- handsomejackuk
- Posts: 939
- Joined: Thu May 04, 2006 10:13 am
Re: valve clearances please.. 660 baghira ?
by Bill Jurgenson » Thu Sep 03, 2009 11:36 pm
.10mm in
.15mm out
both cold
.05mm more if hot
.15mm out
both cold
.05mm more if hot
-
Bill Jurgenson - Posts: 688
- Joined: Sat Nov 18, 2006 1:30 am
- Location: D-74348 Lauffen am Neckar
Re: valve clearances please.. 660 baghira ?
by handsomejackuk » Fri Sep 04, 2009 3:28 pm
bill,
thnaks for that, will check them tomorrow......
Alun
thnaks for that, will check them tomorrow......
Alun
I'm a schizophrenic so am I !!!!
- handsomejackuk
- Posts: 939
- Joined: Thu May 04, 2006 10:13 am
Re: valve clearances please.. 660 baghira ?
by DAVID THOMPSON » Fri Sep 04, 2009 6:46 pm
Bill
would this also apply to my 1997 traveller
by the way its running better after fixing a bunch of things
i found wrong
so valvesa are some thing i need to check as it is now at 7200 miles
dave
would this also apply to my 1997 traveller
by the way its running better after fixing a bunch of things
i found wrong
so valvesa are some thing i need to check as it is now at 7200 miles
dave
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5162
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
Re: valve clearances please.. 660 baghira ?
by Bill Jurgenson » Sat Sep 05, 2009 5:19 am
obviously, it applies to every Yamaha xtz engine ever made.
Has nothing to do with which MZ model or if it is one of the many Yamahas with one of the many derivative engines - or the Aprilia with that engine...
Has nothing to do with which MZ model or if it is one of the many Yamahas with one of the many derivative engines - or the Aprilia with that engine...
-
Bill Jurgenson - Posts: 688
- Joined: Sat Nov 18, 2006 1:30 am
- Location: D-74348 Lauffen am Neckar
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 167 guests