Page 1 of 1
valve clearances please.. 660 baghira ?
Posted:
Thu Sep 03, 2009 5:26 pmby handsomejackuk
Hi,
as topic says, can anyone remind me of exhaust, and inlet valve cleareances.. ?
also did read somewhere that by giving bit more clearance, that engine will be a bit more peppy..
standard clearances please
Alun
Re: valve clearances please.. 660 baghira ?
Posted:
Thu Sep 03, 2009 11:36 pmby Bill Jurgenson
.10mm in
.15mm out
both cold
.05mm more if hot
Re: valve clearances please.. 660 baghira ?
Posted:
Fri Sep 04, 2009 3:28 pmby handsomejackuk
bill,
thnaks for that, will check them tomorrow......
Alun
Re: valve clearances please.. 660 baghira ?
Posted:
Fri Sep 04, 2009 6:46 pmby DAVID THOMPSON
Bill
would this also apply to my 1997 traveller
by the way its running better after fixing a bunch of things
i found wrong
so valvesa are some thing i need to check as it is now at 7200 miles
dave
Re: valve clearances please.. 660 baghira ?
Posted:
Sat Sep 05, 2009 5:19 amby Bill Jurgenson
obviously, it applies to every Yamaha xtz engine ever made.
Has nothing to do with which MZ model or if it is one of the many Yamahas with one of the many derivative engines - or the Aprilia with that engine...