MZ/MuZ Riders

Posted: **Sun Aug 08, 2010 10:26 am**

I found a Jet for a xtz660 I was wondering if the carbs are the same as the tour. I have completed my custom carbon fiber exhaust and would need a jet kit for obvious reasons.

Posted: **Sun Aug 08, 2010 2:51 pm**

Should be...what year? Like to see that exhaust....
As long as the XTZ uses the Teikei carbs,should be ok...
You have a Tour? They used the Teikei carbs....

Posted: **Sun Aug 08, 2010 5:37 pm**

My tour is a '01. And I will post pics as soon as I get a chance too.

Posted: **Sun Aug 08, 2010 9:21 pm**

anyother suggestions for getting?

Posted: **Tue Aug 10, 2010 7:40 am**

Think I'd go to tunebike.de or Bikeworx for suggestions or kit for the Tour.
Even though the exhaust is changed,it may not need to be kitted.....

Posted: **Tue Aug 10, 2010 9:02 am**

I'd have to agree, talk to the folks at Bikeworx as they know the best options.

Posted: **Tue Aug 10, 2010 5:10 pm**

I just bought a kit from Tunebike for my Skorpion; about 80 USD shipped to the US. Easy to set up and worth every penny.

Sam

Posted: **Tue Aug 10, 2010 5:43 pm**

Are you talking about :http://tunebike.de/English/Carburetor/carburetor.html

I ordered the jet kit for 45-48 usd shipped if it doest perform or work it will go back and get the tunebike kit. @sam, How long did it take to ship from tunebike?

Posted: **Tue Aug 10, 2010 5:56 pm**

turner5770 wrote:Are you talking about :http://tunebike.de/English/Carburetor/carburetor.html

I ordered the jet kit for 45-48 usd shipped if it doest perform or work it will go back and get the tunebike kit. @sam, How long did it take to ship from tunebike?

I got the dynojet kit and wasn't satisfied with the results, ($80.00+ usd, then add installation time.)

Got another carb set and sent to Galen at Bikeworx.

If your thinking of the dynojet, I can tell you that Dale Walker at Holeshot won't "touch it" asked him... and he lives in my area.

If Sam's happy I'd listen, I'd also think that it's a "stop gap" until a system like what Bill J recommends can be afforded.

Galen at Bikeworx has knowledge, helping with choices and maybe provide a system.

Just my .02C
OMC

Posted: **Wed Aug 11, 2010 6:48 am**

I got the carbkit. It was 49 EUR, which is about 65 usd, plus shipping. I don't think it took more than a week to get here.

Sam

Posted: **Wed Aug 11, 2010 6:59 am**

How was installation?

Posted: **Wed Aug 11, 2010 4:23 pm**

Ordering tunebike.de kit as well.

Posted: **Thu Aug 12, 2010 6:39 am**

turner5770 wrote:How was installation?

Piece of cake. Unless you need to make significant jetting changes you can install it w/o removing the carbs!

Sam

Posted: **Thu Aug 12, 2010 11:26 am**

That's a huge deal carb removal is easy but getting it back together is a another story

MZ/MuZ Riders

Jet Kit

Jet Kit

Re: Jet Kit

Re: Jet Kit

Re: Jet Kit

Re: Jet Kit

Re: Jet Kit

Re: Jet Kit

Re: Jet Kit

Re: Jet Kit

Re: Jet Kit

Re: Jet Kit

Re: Jet Kit

Re: Jet Kit

Re: Jet Kit