Page 1 of 1

Skorp bogs at mid rpm. Idle and top end fine. Suggestions?

PostPosted: Thu Aug 12, 2010 11:35 pm
by pwillikers
The subject says it all. I'm about to pull the carb and clean the pilot jet - probably clean the whole thing while I'm there. Am I pursuing the guilty culprit? Any suggestions?

Re: Skorp bogs at mid rpm. Idle and top end fine. Suggestions?

PostPosted: Fri Aug 13, 2010 2:56 am
by Bill Jurgenson
sounds to me like the membrane of the secondary has swollen up so much it takes quite a bit of vacuum to move it initially.
Make a 1/8" spacer between it and the dome.