Page 1 of 1
Baghira Black P. Rear Pegs
Posted:
Thu May 17, 2012 5:08 amby pontala
Is any one knows were I can buy the rear pegs for a Baghira? Just got the bike and realize it not so easy to find parts for this bikes. if you like to email me directly my email is
pontala1@gmail.com I appreciate any help
Re: Baghira Black P. Rear Pegs
Posted:
Thu May 17, 2012 11:57 amby amahoser
You can get aftermarket pegs for a yamaha that will work. My bike didn't have rear pegs as well. I ended up going to a bike dismantler and sorting through boxes of pegs until I found a match. I believe it was for a FZR 600 but I am not totally positive (it was a few years ago). There is also a plate and a ball bearing that you will need. I bought the plate and bearing from the dismantler and the new aftermarket black pegs from his stock as well.
Jose Soriano
Re: Baghira Black P. Rear Pegs
Posted:
Wed May 23, 2012 9:55 amby pontala
thanks I will check it out
Re: Baghira Black P. Rear Pegs
Posted:
Wed May 23, 2012 12:02 pmby droy
Correct those are shared with most of the FZR line. MuZ Skorpion rear pegs will also work. I just put a set of Baghira rear pegs on a Tour - straight 1 to 1 replacement.
Doug in NJ
Re: Baghira Black P. Rear Pegs
Posted:
Thu May 24, 2012 5:50 amby pontala
Just look at it on ebay do you know what year fzr that will fit a 03 Baghira?
Re: Baghira Black P. Rear Pegs
Posted:
Fri May 25, 2012 8:04 pmby amahoser
I honestly dont remember. I would go into a bike dismantler and sort through their bins. Took me about 5 minutes to locate a matching peg. Plus, you will need the plate and bearing in order for the pegs to lock in the up position.
Jose Soriano
Re: Baghira Black P. Rear Pegs
Posted:
Fri Jun 01, 2012 5:40 pmby mr-brightside
ive got a 1989 fzr1000 exup and the rear pegs look to be a near exact size and match to my 2002 baghira ,