Changing the handlebars on a Skorpion tour
Posted:
Mon Nov 05, 2012 2:05 pm
by Old Dog
OK, I am thinking about a serious winter slog next year and the OE bars aren't coming because if there is a spill I cannot straighten them and they pop out of alignment every time you look at them. So..has anyone here replaced the OE clip ons with handlebars and can you let me have the details please.
Many thanks
Re: Changing the handlebars on a Skorpion tour
Posted:
Mon Nov 05, 2012 2:37 pm
by radiograf
I've not done this myself ( I always look for a machine with tubular bars, just old fashioned I guess), but check this link
http://www.busters-accessories.co.uk/productinfo/MAP523305/Bars-And-Footrests/Universal-Handlebar-Risers/On-Two-Wheels, as I think this will be the easiest route.
the cables may fit with a bit of re-routing, or you may have to fit baghira ones. A good time to change to braided steel brake hose too.
Check out this picture in the gallery
http://mzriders.com/gallery/pic.php?mode=large&pic_id=607&sid=f2da8b8794e6cd741c95c33166a27d19, it may help.
Re: Changing the handlebars on a Skorpion tour
Posted:
Mon Nov 05, 2012 3:44 pm
by Norman Wade
Re: Changing the handlebars on a Skorpion tour
Posted:
Mon Nov 05, 2012 7:16 pm
by DAVID THOMPSON
this is mine after a day changing things
not a big fan of mods but for me the low bars did not work very well
looks a bit different now i did a change so the gps mount hides the piece of gas pipe holding
the bars in line
bars are from 95 Saxon Tour they had to be cut so the T mounts would fit
would love to have a top tripple clamp with regular bar mounting holes
as this set up is better but still way to wide
dave
click on picture for bigger view
once makes it bigger 2 times makes it real big