Page 1 of 1
Baghira oil change
Posted:
Mon May 20, 2013 9:24 amby duncmac
Did the oil yesterday.
There was no washer or oring on the sump plug. What size oring goes there?
Wasnt leaking, bit hard to undo though, used a copper washer instead.
Same for the frame/course filter. No washers, done up extra tight. What should be here, metal washer or rubber washer?? Any idea on sizes?
Re: Baghira oil change
Posted:
Mon May 20, 2013 2:41 pmby den
hi mate , i drained the frame oil via the banjo at the bottom of the frame tube,,banjos always need a copper washer,,top and bottom,,the sum plug bolt will need one as well as this helps it to seal and stops it from seizing,
Re: Baghira oil change
Posted:
Tue May 21, 2013 1:36 amby duncmac
Hmm none present when I pulled the frame tube pipe.
Just done up extra tight.
Does anyone know the size?
Otherwise I'll ring up grahams.
Re: Baghira oil change
Posted:
Tue May 21, 2013 4:22 amby den
- oil line for baggy
Re: Baghira oil change
Posted:
Tue May 21, 2013 5:45 amby duncmac
Cheers Den
Cant find any 16 x 12 washers so have emailed grahams spares to see if they can advise or provide.
Re: Baghira oil change
Posted:
Tue May 21, 2013 11:40 amby den
duncmac wrote:Cheers Den
Cant find any 16 x 12 washers so have emailed grahams spares to see if they can advise or provide.
most oil line banjos are of a standard ,just go to any car motor factors and ask for copper washers, cheap as chips, i think i remember seeing some in halfords,,sump plug washer 16 x 12
Re: Baghira oil change
Posted:
Tue May 21, 2013 1:48 pmby duncmac
Cheers, but cant see any 16x12's plenty of 16x20's though