Carb drain screw.

[lavrentyuk]

Anybody got a source of these, preferably in the uk ?

Richard

[droy]

Standard Yamaha part for xtz660 and SZR660

[lavrentyuk]

So I understand, but I am told I would have to order the whole carb set up. Ouch. Might try another dealer.

[lavrentyuk]

Which I just did and Bingo. Two ordered.

Grahams were only able to talk about whole twin carb setups at one hell of a price.

[Nils D]

I have ruined the head of several carb drain screws. Until I realized: You can't use bits, normal short bits, to work the screw.
There is not enough room to the side for the very holder of the bit. And that places the bit slightly of centre, which makes it slip and starts to grind down the head of the screw. Use longer bits or a normal screwdriver.

[duncmac]

Which I just did and Bingo. Two ordered.

Grahams were only able to talk about whole twin carb setups at one hell of a price.

got the details of the place you ordered from? Ta

[breakwellmz]

Which I just did and Bingo. Two ordered.

Grahams were only able to talk about whole twin carb setups at one hell of a price.

A couple of years ago i was able to get one from Grahams, i wonder why the change of policy?

[lavrentyuk]

https://www.motorcyclespareparts.eu/log ... y-msp.aspx

Not all cheap for what they are but at least its sorted.

Richard

[duncmac]

https://www.motorcyclespareparts.eu/login.aspx?returnurl=/my-msp.aspx

Not all cheap for what they are but at least its sorted.

Richard

Ta!