MZ/MuZ Riders

Hi
can anyone tell me the bearing numbers I will need for the wheel bearings and drive bearings for an ETZ251 Saxon with cast wheels?

thanks!

Yes, I should have given more detail - the bike is a ETZ 251 Saxon 1993 (German made) machine with cast wheels.

I need, if possible, to get details of the rear wheel bearings and the drive bearings. Of course, there are two bearings in the wheel but I'm not sure how many are in this drive - one or two bearings.

So, If anyone can help with how many bearings there are in total (rear wheel and drive|) and what number (code) these bearings are I'd be very grateful.

Many thanks,
Richard

There are 2 off 6302 bearings in actual wheel and 2 off 6004 bearings in the chain carrier/cush drive housing (according to the pdf file below-Thanks Dave). For a definitive answer ask at the mz_riders yahoo group

http://groups.yahoo.com/group/mz_riders/

or email Burwin motorcycles

martinb@burwin.co.uk

There may be a link to a copy of the workshop manual somewhere on this forum. Do a search.

David.

pdf of rear of my 95 saxon tour should be the same
tested in adobe 9 and foxit reader
dave in west virginia usa
please let me know if it downloads ok for you