Brake Switches

Black Panther/Street Moto, Baghira, Enduro, Mastiff, Skorpion Traveller and Tour.

Moderators: DAVID THOMPSON, phlat65

Brake Switches

Postby BlueRidgePanther » Mon May 12, 2008 1:15 pm

So I need to replace both of my Baggy's brake light switches, front and rear. I know the rear is from a KTM, but what year and model? I don't know anything about the front one. Any thoughts or suggestions?
BlueRidgePanther
 
Posts: 67
Joined: Fri Dec 24, 2004 12:57 pm
Location: Richmond, Virginia

Re: Brake Switches

Postby DAVID THOMPSON » Mon May 12, 2008 5:19 pm

this info works on rt125 and saxon tour
and is a good place to start

rear switch= aprilia number on parts bag is
8124479

for rear brake light switch on my 2002 rt125


------------------------------------------------------
the front one is a bmw part
61 31 1 244 070

This FRONT part fits models listed for year 1981 maybe others
R80, R80ST, R65, R80RT, R80GS, R100/7, R100CS, R100RS, R100RT, R65LS

also fits 2002 mz rt125cc and 1995 saxon tour and harley davidson sprint from early 1970's
search word fbs rbs
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
User avatar
DAVID THOMPSON
Moderator
 
Posts: 5162
Joined: Sun Nov 23, 2003 11:01 am
Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV

Re: Brake Switches

Postby MSW » Tue May 13, 2008 8:25 pm

According to previous posts on this site, the REAR brake light switch is the same as on a 1998 KTM LC4. Note that I've never actually tried to fit one, though, so I make no guaranties about the truth of that statement.

These guys: http://cyclehuttktm.com/ sell the KTM part on their website as part no. 50311051100 for $22.20 plus $8.00 shipping. Probably worth a shot, if you're desperate and want it quickly. FWIW, the KTM part looks the same as the MZ version.

BTW, you should still be able to get the MZ version of the part from either of these sources:

1. SF Moto in San Francisco. They're great guys and are willing to order anything that's still available. They usually charge a fair price, given that they have to source everything from Germany. Whenever I need a part, and I'm not sure that I can get an aftermarket version from a trusted U.S. source, I go to SF Moto first.

2. Graham's in the U.K., which comes highly recommended by the Brits on this site for hard to find MZ parts, shows the rear brake switch on their website for sale here: http://www.grahamsmotorcycles.com/grahams_motorcycles%20Parts%20list%20Baghira%20Mastiff.htm. The price they're asking converts to about $23.76. I've heard that they'll ship to the U.S., but I've never tried before, so I can't say for sure whether they will or how much they'd charge. If they do, for that price, even if shipping from UK makes it a bit more than the KTM solution above, having the part that you know is correct is probably worth a few bucks more.

As I said, if you're desperate and need it quickly, you might give the KTM part a shot. But if you can wait a week or so, I'd try SF Moto first to see how much they'd charge to get it from Germany. If they can't help, or can only get it for an outrageous price, I'd then try Graham's.

Hope that helps.
MSW
2005 Black Panther

I like my beer like I like my women: cold, dark, and bitter.
MSW
 
Posts: 195
Joined: Sun Feb 27, 2005 1:32 pm

Re: Brake Switches

Postby Bill Jurgenson » Tue May 13, 2008 11:15 pm

hydraulic brake light switches are just that, hydraulic brake light switches. They ain't KTM or BMW or XYZ brand motorcycle parts. All they need to have is the right thread and that is either M10x1 (Brembo and also standard) or M10x1.25 (Japanese standard and also Grimeca). Any dealer and probably any car parts source will have them. Yamaha dealers will probably have both both sizes since Yamaha owns Brembo and uses Brembo parts to a certian extent. BMW uses Brembo parts. So do KTM and Aprilia(mostly).

At the front, you can also use a hydraulic switch if getting the lever switch proves to be difficult. HIgh-end radial pumps most often use inline hydraulic switches in fact. You can use the same switch as the one for the rear brake.

Lever switches are almost always found only on that particular type of brake pump and often differ from model to model of the same manufacturer. The switch of a Brembo PS16 is entirely different from that of a Brembo PSC16.
User avatar
Bill Jurgenson
 
Posts: 688
Joined: Sat Nov 18, 2006 1:30 am
Location: D-74348 Lauffen am Neckar

Re: Brake Switches

Postby Sue » Wed May 14, 2008 3:30 pm

If youre interested I spoke to Grahams motorcycles this week, they deliver anywhere in the world - not sure of charges but if their UK delivery charges are anything to go by (£1.50) I dont think the charges would be that bad. He's clarified he has most common parts on the shelf and can post out straight away, if he doesnt have them he will get them direct from MZ within 7 days.

Very helpful too and has loads of info on compatible parts too. :-D
Sue
 
Posts: 89
Joined: Sat May 03, 2008 5:00 pm
Location: Wiltshire, UK

Re: Brake Switches

Postby phlat65 » Thu May 22, 2008 10:50 pm

I picked up the FRONT brake lamp switch at my local KTM dealer for $9.00. They used the same Domino controls on their late 90's dual sport bikes. They had it in stock.
2001 MZ Black Panther
2001 Suzuki RM125 (full Enduro)
Old Hondas- TT500 Ascott, 305 Dream Touring
User avatar
phlat65
Moderator
 
Posts: 735
Joined: Thu Nov 13, 2003 1:05 am
Location: Seattle

Re: Brake Switches

Postby BlueRidgePanther » Sat May 24, 2008 1:28 pm

phlat65 wrote:I picked up the FRONT brake lamp switch at my local KTM dealer for $9.00. They used the same Domino controls on their late 90's dual sport bikes. They had it in stock.


Do you know the model of KTM that the front switch came from? There's a KTM dealer just 10 minutes away from me, so that's probably the best route for me to go.
BlueRidgePanther
 
Posts: 67
Joined: Fri Dec 24, 2004 12:57 pm
Location: Richmond, Virginia

Re: Brake Switches

Postby pamonster » Mon Jun 16, 2008 10:49 am

I got the goods, went to the KTM dealer as I needed both front and back switches as well. They had a used front that I got for 1/2 off and ordered a new front and rear.
Front: KT51011050000
Rear: KT50311051144

Hope that helps
2001 MZ Baghira-Black Panther
pamonster
 
Posts: 25
Joined: Tue Jun 10, 2008 10:44 am
Location: Ames, Iowa USA


Return to 660 cc

Who is online

Users browsing this forum: No registered users and 273 guests