I just had the seat on my Baggy re-shaped by Bill Mayer Sadles in Ojai, California. He's only 65 miles from me, so I was able to ride up early in the morning, and they fit the seat to me while I waited. It is a major improvment. Riding there was a painful experience, but the ride back was comfy. They also do mail order work, if anyone is interested. Not cheap, however. The total bill was $480. Worth it, though. I couldn't ride it any sort of distance before without a lot of stops. I posted a picture in my album (lcrken), if anyone is interested.
Ken
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
New Baggy Seat
Moderators: DAVID THOMPSON, phlat65
5 posts
• Page 1 of 1
New Baggy Seat
by lcrken » Thu Sep 17, 2009 6:21 pm
- lcrken
- Posts: 15
- Joined: Wed Jul 22, 2009 11:03 pm
- Location: Southern California
Re: New Baggy Seat
by borisattva » Thu Sep 17, 2009 9:16 pm
-
borisattva - Site Admin
- Posts: 99
- Joined: Fri Nov 07, 2003 1:18 am
- Location: NYC
Re: New Baggy Seat
by DAVID THOMPSON » Thu Sep 17, 2009 10:40 pm
bet that 663cc saxon tour pictured in the same link is a sudden ride
my stock saxon tour goes fast enough to scare me
have you had that one on a dyno yet
dave
my stock saxon tour goes fast enough to scare me
have you had that one on a dyno yet
dave
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5162
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
Re: New Baggy Seat
by lcrken » Fri Sep 18, 2009 4:15 pm
I haven't had it on a dyno. I orginally built it as a race bike for a local class, but took so long it was OBE. I just finished converting it to a street bike, and am still fine tuning the carb (Mikuni 44 mm). It is a blast to ride. It has an Axtell head and 860 cam. I had a similar spec engine, but only 600cc, in my road race bike some years back, and it put out 61 rwhp on the AMI dyno at Daytona. I expect this one to be somewhere around that, maybe even a lttle less with the muffled exhaust. Certainly enough for such a light weight bike.
Ken
Ken
Last edited by lcrken on Sun Sep 20, 2009 11:49 am, edited 1 time in total.
- lcrken
- Posts: 15
- Joined: Wed Jul 22, 2009 11:03 pm
- Location: Southern California
Re: New Baggy Seat
by DAVID THOMPSON » Fri Sep 18, 2009 11:22 pm
from riding my 490cc stocker
may i recommend you do not let idiot friends take test rides
with 2x the horsepower it could get very ugly at the crash site
dave
may i recommend you do not let idiot friends take test rides
with 2x the horsepower it could get very ugly at the crash site
dave
Dave 2002 MZ RT125+1995 Saxon Tour(500cc)
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
1997 MZ 660 Traveller+6/13/09 WV USA
"IN the end times the IDIOTS will be in charge
of everything"
"I like the road less traveled if it's PAVED!"
wd8cyv at yahoo dot com
-
DAVID THOMPSON - Moderator
- Posts: 5162
- Joined: Sun Nov 23, 2003 11:01 am
- Location: Parkersburg, West Virginia USA .questions answered MZ 95 up, BMW 1953 to 1979 and ham radio WD8CYV
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 19 guests