RT125 stripping

Moderators: DAVID THOMPSON, phlat65, Brian

RT125 stripping

Postby Bertie » Thu Jul 22, 2010 2:31 pm

my MZ RT125 has just been written off, CAT C, front impact. main damage is bent forks and a few other peices. otherwise the bike is in excellent condition

bike is 2008, engine on around 8000 miles and is undamaged, was serviced about 4 miles before the accident!

anyone interested in any parts? should have the bike back at my house next week and am willing to post pretty much any of it!
Bertie
 
Posts: 26
Joined: Wed Feb 03, 2010 3:00 am
Location: Exeter, Devon, UK

Re: RT125 stripping

Postby stephendacosta » Sat Jul 24, 2010 9:57 pm

I know the shipping will be rediculous, but give me prices on the insturment cluster,speedometer cable, lower fork legs, and rear shock.---Steve
Stephen DaCosta
1995 Skorpion Sport; ten-MZ 125's;2009 BMW G650GS;1981 GS450 Suzuki Roadracer
stephendacosta
 
Posts: 125
Joined: Sat Nov 24, 2007 3:28 pm
Location: USA, Chagrin Falls, OH Near Cleveland

Re: RT125 stripping

Postby mzsrus » Sun Jul 25, 2010 12:09 pm

tex me, i be interested, 0777 9012019

brecon and zschopau andy
Owner of 10 old mz bikes from 1956 to 1976
new owner of Mz 1000s
mzsrus
 
Posts: 125
Joined: Tue Sep 07, 2004 3:09 pm
Location: powys wales

Re: RT125 stripping

Postby Bertie » Mon Jul 26, 2010 4:34 am

stephendacosta wrote:I know the shipping will be rediculous, but give me prices on the insturment cluster,speedometer cable, lower fork legs, and rear shock.---Steve

lower fork legs were quite bent in the accident and the instrument cluster bracket was also bent, although i believe the instrument cluster should be ok

i honestly have no clue what any of those parts are worth. Honda CBR125 shocks go for about £100 on ebay, so maybe £80 plus postage? instrument cluster maybe £35 plus postage? speedo cable probably worth a fiver?
Bertie
 
Posts: 26
Joined: Wed Feb 03, 2010 3:00 am
Location: Exeter, Devon, UK

Re: RT125 stripping

Postby Bertie » Mon Jul 26, 2010 4:35 am

mzsrus wrote:tex me, i be interested, 0777 9012019

brecon and zschopau andy


what parts might you be interested in?
Bertie
 
Posts: 26
Joined: Wed Feb 03, 2010 3:00 am
Location: Exeter, Devon, UK

Re: RT125 stripping

Postby mzsrus » Thu Jul 29, 2010 4:23 am

Engine, carb, starter clutches, swingarm.

:D
Owner of 10 old mz bikes from 1956 to 1976
new owner of Mz 1000s
mzsrus
 
Posts: 125
Joined: Tue Sep 07, 2004 3:09 pm
Location: powys wales

Re: RT125 stripping

Postby Bertie » Thu Jul 29, 2010 11:52 am

all of those parts are available. i dont know how much they are all worth really, make an offer on them!
Bertie
 
Posts: 26
Joined: Wed Feb 03, 2010 3:00 am
Location: Exeter, Devon, UK

Re: RT125 stripping

Postby Bertie » Sat Jul 31, 2010 4:49 pm

the bike is back in my garage so all parts are available.

as it turns out engine is on about 6800 miles, not 8000 like i thought!!
Bertie
 
Posts: 26
Joined: Wed Feb 03, 2010 3:00 am
Location: Exeter, Devon, UK

Re: RT125 stripping

Postby stephendacosta » Sun Aug 01, 2010 10:17 am

Bertie wrote:
stephendacosta wrote:I know the shipping will be rediculous, but give me prices on the insturment cluster,speedometer cable, lower fork legs, and rear shock.---Steve

lower fork legs were quite bent in the accident and the instrument cluster bracket was also bent, although i believe the instrument cluster should be ok

i honestly have no clue what any of those parts are worth. Honda CBR125 shocks go for about £100 on ebay, so maybe £80 plus postage? instrument cluster maybe £35 plus postage? speedo cable probably worth a fiver?


So, I would like both the insturment bracket/cluster, speedo cable and the rear shock at those prices. Do you have paypal? Please find out the cost of posting. Your sure the lower legs are both bent? Usually the fork tubes bend and not the lower leg itself. I do not have texting; use my email for contact huntdacosta@roadrunner.com. My address for post cost is
18854 Snyder Road, Chagrin Falls, OH 44023 USA---Steve
Last edited by stephendacosta on Sun Aug 01, 2010 12:05 pm, edited 1 time in total.
Stephen DaCosta
1995 Skorpion Sport; ten-MZ 125's;2009 BMW G650GS;1981 GS450 Suzuki Roadracer
stephendacosta
 
Posts: 125
Joined: Sat Nov 24, 2007 3:28 pm
Location: USA, Chagrin Falls, OH Near Cleveland

Re: RT125 stripping

Postby Bertie » Sun Aug 01, 2010 11:24 am

im not 100% sure both the lower legs are bent. on the right hand side you can fit your fingernail between the fork seal and the lower leg and it is definately dented just at the seal.

i had a quite look at prices for postage to the US and the cheapest came back at about £70, making it £190 overall. that was just taking a guess at size and weight, its not an accurate price. if you are still interested i can get a more accurate figure
Bertie
 
Posts: 26
Joined: Wed Feb 03, 2010 3:00 am
Location: Exeter, Devon, UK

Re: RT125 stripping

Postby stephendacosta » Tue Aug 03, 2010 5:02 pm

Still interrested. Let's make a deal.You did not answer about paypal, or I could post you a check. email huntdacosta@roadrunner.com Include the lower legs, repair sounds possible.If using DHL for shipping is an option, that would save weeks of delay in the import section of our post office.---Steve
Stephen DaCosta
1995 Skorpion Sport; ten-MZ 125's;2009 BMW G650GS;1981 GS450 Suzuki Roadracer
stephendacosta
 
Posts: 125
Joined: Sat Nov 24, 2007 3:28 pm
Location: USA, Chagrin Falls, OH Near Cleveland

Re: RT125 stripping

Postby Bertie » Wed Aug 04, 2010 9:12 am

stephendacosta wrote:Still interrested. Let's make a deal.You did not answer about paypal, or I could post you a check. email huntdacosta@roadrunner.com Include the lower legs, repair sounds possible.If using DHL for shipping is an option, that would save weeks of delay in the import section of our post office.---Steve


seeing as you are still interested i will strip the parts off my bike, weigh them and produce a more accurate figure for you. i wont be able to do this until the weekend at the earliest though. if you cover postage for the fork legs i will throw them in free, seeing as i cant gaurantee their straightness or usability

my email address/paypal address is bertiegalliford (at) hotmail (dot) com
Bertie
 
Posts: 26
Joined: Wed Feb 03, 2010 3:00 am
Location: Exeter, Devon, UK

Re: RT125 stripping

Postby Bertie » Fri Aug 06, 2010 2:18 pm

exhaust silencer definately gone. rear shock, instrument cluster, speedo cable and lower fork legs are going. everything else is still up for grabs people :)
Bertie
 
Posts: 26
Joined: Wed Feb 03, 2010 3:00 am
Location: Exeter, Devon, UK

Re: RT125 stripping

Postby Bertie » Sat Aug 14, 2010 12:11 pm

no one want any parts?
Bertie
 
Posts: 26
Joined: Wed Feb 03, 2010 3:00 am
Location: Exeter, Devon, UK

Re: RT125 stripping

Postby Bertie » Thu Aug 19, 2010 6:09 am

the bike is still here with loads left on it. im willing to post anywhere in the world (recently posted rear shock, lower fork legs and instrument cluster to Ohio problem free)
Bertie
 
Posts: 26
Joined: Wed Feb 03, 2010 3:00 am
Location: Exeter, Devon, UK

Next

Return to For Sale

Who is online

Users browsing this forum: No registered users and 34 guests