Tuned Engine & Baggi Parts for Sale

[Whysub]

Hi

Not been on here for a while due to not having an MZ on the road. Now it looks like that is going to happen, and i need to empty my garage, so have loads to get rid of.

I had a Baggi which i used for commuting, but wanted a bit more power, so i bought a Skorpion project bike (off of here) to get the engine big bored and tuned. that way I could get the engine done and still keep my bike on thje road. Once the engine was built I could spens a weekend taking out the one in there and putting the tuned engine in. Then my employers gave me a bike to use for work, so i decided the MZ would be my weekend bike, and decided to do up the chassis. You know, lighter rims and hubs, alloy subframe, USD forks, 6 pot beringer and so on. Long story cut short, the chassis has been lost and i am left with parts that I am sure will suit others here.

So for sale I have:

Body Parts

Tank, tank panels, side panels, seat, front scaffolding, rear scaffolding, radiator, exhaust headers, rear subframe and other bits and pieces. All in black and good condition. Open to offers

Engines

Engine 1. Rebuilt by Steve Ruth THE expert on XTZ engines. Built with Wiseco 106mm piston, rebored, camshaft reprofiled by Phil Joy. Engine built at "Mates Rates" on the labour costs. All measurements at time of rebuild noted and all work done noted (Steve's handwritten notes supplied). Bui;lt for exrtra power but with reliability. Steve thinks the engine should produce about 60 bhp.I say should as this engine has never been run. Just take your engine out and slot this one in. No waiting for your motor to be built, and keep it for a spare. £800 or offers

Engine 2- Taken from my Baghira. 7,000 kms, bit of paint bubbling (used through 1 winter). Great runner as it shuld be at such a low mileage Offers over £100

Exhaust

CarbonCan Co twin exit oval end can. Used but good condition-sound lovely and so much lighter than the standard can (isn't everything though?). Comes with link pipe and larger header pipes. These came from Bernt at Tunebike in Germany and are still in their bag having been unused (these are now €162) £100 complete

Carbs

Set 1-From my own Baggi, so done 7,000 and completely standard. Offers

Set 2- From my Skorpion project bike. Never had them stripped so can't say if they are complete. very dirty but look all there. Offeres

Set 3 Keihin FCR 40 flat slide carbs. Originally from a Pmi BMW supermono racer but will work well on the tuned XTZ engine. Need some inlet manifolds made up or purchased (Slipstrem sell them I think) which will use the standard Baggi/Skorpion airbox. come with a box of jets and needles. Excellent condition as only used for a few meetings. £300 or offers

Please PM me or contact me at ampstar_racing@hotmail.com and i'll get back to you. Always happy to talk bikes!

Thanks. Col

[dave]

Hi Col,
Sent you a PM about the can and pipes...
Dave.

[Rune]

HI Col,

Sent you a PM about the seat and stock carburetor

Sean

[cat]

Please let me know if you still have the tunebike.de header pipes.