To all
Does anyone know the maker of the ignition switch/steering lock fitted to the Mastiff models?
George Waite
MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
SWITCH
Moderators: DAVID THOMPSON, phlat65
5 posts
• Page 1 of 1
SWITCH
by boilermaker » Thu Aug 18, 2011 3:18 pm
- boilermaker
- Posts: 370
- Joined: Sat Nov 10, 2007 3:22 pm
- Location: Harbertonford, Devon, UK
Re: SWITCH
by basser23 » Thu Aug 18, 2011 4:58 pm
of course i have one at home...I believe it begins with a Z and is also used by MotoGuzzi
thinkits the same as on a Skorpion
thinkits the same as on a Skorpion
- basser23
- Posts: 654
- Joined: Tue Nov 29, 2005 1:27 pm
- Location: central florida
Re: SWITCH
by Norman Wade » Fri Aug 19, 2011 12:46 am
If it's the same as the Skorpion, then it's made by Zadi. A very common make on European bikes.
Norman
Norman
-
Norman Wade - Posts: 134
- Joined: Mon Apr 17, 2006 6:22 am
- Location: Renfrewshire, Scotland
Re: SWITCH
by basser23 » Fri Aug 19, 2011 9:28 am
ah yes Zadi! How could I forget 
I had to use the actual switch assembly on my Skorp cuase you can't easily remove the lock cylinder from the upper triple tree.
(mine was raced and had a toggle switch on the molex connector to turn the ignition on and off--thank heaven the wiring was left stock!)
I had to use the actual switch assembly on my Skorp cuase you can't easily remove the lock cylinder from the upper triple tree.
(mine was raced and had a toggle switch on the molex connector to turn the ignition on and off--thank heaven the wiring was left stock!)
- basser23
- Posts: 654
- Joined: Tue Nov 29, 2005 1:27 pm
- Location: central florida
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 134 guests