MZ Baghira - Technical Data, Service Specifications, Parts.

[macsquirty]

Hi, thought i would chuck this in the mix......

Gear change lever and linkage is almost identical to the CB250 set......slight modification if memory serves me was to cut the thread on both sides a little to make it a snug fit, for me i prefer this pedal as the pedal itself is larger than the factory one which is better for my size 11's and the cost for a good conditioned second was only £20 from a main dealer.

Still got the bike on an 02 and still looking for ways to improve with minimal £££'s so i will stay posted.

Kind regards,
Mac

[Nesim]

Gear change lever and linkage is almost identical to the CB250 set......slight modification if memory serves me was to cut the thread on both sides a little to make it a snug fit, for me i prefer this pedal as the pedal itself is larger than the factory one which is better for my size 11's and the cost for a good conditioned second was only £20 from a main dealer.

Hi, look what I've found. I'm not sure about dimensions but its just like my gear lever:
http://www.wemoto.com/parts/picture/HL-543835/

[samandkimberly]

The BMW front brake switch to use on the Baghira is 61 31 1 244 070. It is way higher quality than the KTM/OE one, fits just as well and cost less than 15USD. Just installed one today.

Sam

[cat]

Added to .zip file: MZ Baghira 660 - Fasteners.htm
(Tightening torque (as per Owners Manual) and sizes)

[handsomejackuk]

Gear change lever and linkage is almost identical to the CB250 set......slight modification if memory serves me was to cut the thread on both sides a little to make it a snug fit, for me i prefer this pedal as the pedal itself is larger than the factory one which is better for my size 11's and the cost for a good conditioned second was only £20 from a main dealer.

Hi, look what I've found. I'm not sure about dimensions but its just like my gear lever:
http://www.wemoto.com/parts/picture/HL-543835/

anyone confirm this gear lever to work on a baghira ?????

as i really fed up with my sloppy lever

[Chalks]

Just discovered that a Baggy neutral light switch is the same as a Yamaha DT125 (2005) & scored one off fleacebay for £10, Bargain!

Also a good online parts catalouge for cross referencing part numbers for 660 compatibility :

http://www.yamaha-motor.eu/uk/informati ... logue.aspx
then click the link for
Yamaha Online Parts Catalouge.

[handsomejackuk]

klk

[Zedthou]

Loads of handy info in this thread,cheers.