MZ/MuZ Riders
A community for owners and riders or MZ Motorcycles, Scooters, and ATVs.
Valve stems
Moderators: DAVID THOMPSON, phlat65
3 posts
• Page 1 of 1
Valve stems
by RiverDrive » Tue May 15, 2012 12:54 pm
Can someone fill me in on the size valve stem I need for the Skorpion's rims? Are all valve stems the same size?
01 Sport Cup Gone Sport
-
RiverDrive - Posts: 131
- Joined: Thu Aug 19, 2004 12:58 pm
- Location: Philadelphia PA. US
Bike Tire Valve stems
by jimc » Tue May 15, 2012 8:25 pm
As far as I know, tubeless bike valve stem (.327" diameter)is smaller diameter than car/truck stuff. (.453' or .625")
some different lengths and angles available if you look hard enough.
Most any bike dealer or bike parts/tires mailorder has the rubber pop in ones pretty cheaply.
Not a bad idea to replace with the tire.
The ultimate is the high pressure metal valve if you have a NAPA auto parts nearby.
http://napaonline.com/Catalog/Result.as ... 1&Dp=3&N=0
some different lengths and angles available if you look hard enough.
Most any bike dealer or bike parts/tires mailorder has the rubber pop in ones pretty cheaply.
Not a bad idea to replace with the tire.
The ultimate is the high pressure metal valve if you have a NAPA auto parts nearby.
http://napaonline.com/Catalog/Result.as ... 1&Dp=3&N=0
1996 Skorpion Sport
1981 XT550 Yamaha
1989 KDX200 Kaw
1994 Duc 900cr
1981 XT550 Yamaha
1989 KDX200 Kaw
1994 Duc 900cr
- jimc
- Posts: 77
- Joined: Mon Apr 03, 2006 8:03 am
- Location: Dutchess County, New York
Re: Valve stems
by cat » Wed May 16, 2012 4:20 am
The metal ones like NAPA has are what are typically used with tubeless conversions.
-
cat - Posts: 596
- Joined: Wed Nov 30, 2005 8:42 am
- Location: South Africa
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 114 guests