ignition switch wires... Baghira

[handsomejackuk]

Just checking out the electrical drawing for the baghira Ignition switch, and trying to work out what is going on there...

first of all there is two unused wires on the ignition switch plug...

now looking at the electrical drawing...
this is what i can make out...

in the "off" and "lock" position.. terminals 1,2 are shorted...

in the "P" (park) position terminals 1,2 are shorted, and 3,5 are shorted...

in the "on" position terminals 3,4 are shorted...

now on the connector X6... terminal 2,3 are not used...!!!

these could be used to power an alarm, or a flashing alarm l.e.d.


what seems to be unclear to me is how is power getting to anything on "on " position when terminal 3 has no connection...

can anyone see the logic in this or is the electrical drawing wrong...???