by harold » Sun May 04, 2014 6:08 am
I get on with my foot on the ground, but use the same technique with the foot peg to get off mine, and I weigh 240 lbs. The kick stand hasn't broken or bent yet. I also loosened the spring on the shock, lowered the forks till they almost hit the handle bars, and cut an inch off the rear subframe to lower the seat some more. Cutting that also made the seat more level, as mine was tilted towards the front. Then I had to cut the kick stand off about an inch, and I welded a flat plate to the end to keep it from digging into the dirt. It took a while of playing around with things, but an inch or two makes a big difference in being able to get on and off.