MZ 1000s coils

[silver MZ-1000s]

Hi . does anybody finally knows what brand of ignition coils will fit the 1000 s ? of course here in USA ) what car or other bike have same coils or something that fits and works ? thanks

[MJ310]

Aprilia's use the exact same coil but it's much cheaper to buy Citroen or Peugeot coils and cut off the shroud.

[AJJohnson]

I'll have to remember that Aprilia coils work. I have a set left over from a Aprilia Falco I parted out last year.

[boilermaker]

I have just replaced another ignition pencil coil. They were originally made by Johnston controls ltd (JCL) but are now made by VALEO part no :245094. You will need to carefully remove the unnecessary bracketry at the top. Price in the UK : £ 28-30.100

1000coils

[Thorsten-aus-SO]

Hello.

Citroen C5 C6 C8 Nr.: 0000597094
Renault Nr.: 9633001580
BERU Nr.: 0040.100.347 / ZS 347

Numbers are from Germany. So check at your dealer.

Regards

Thorsten

[silver MZ-1000s]

[silver MZ-1000s]

NGK coils for MZ 1000 , cost without shipping around 27$

[MJ310]

Would you be willing to buy a couple and send the to the UK?

[Thorsten-aus-SO]

@MJ310

Why so complicated ? They are offered at ebay in Germany, you can order from UK as well.

http://www.ebay.de/itm/NGK-Zundspule-48031-/191459305063?hash=item2c93dd2667:g:6qYAAOSwdWBXPC1a

And there will be customs union - as a member of the EU

[Joe Cool]

My MZ1000s had trouble last Sunday. I need the cross reference for the coil packs available in the USA.
Thanks in advance

[MJ310]

Peugeot,Citroen V6 coils fit, all you need to do is cut off the shroud and seal the gap, less than 1/2 the price of MZ coils.

[Joe Cool]

MJ310, Would these be the ones I need?
http://www.ebay.com/itm/New-Premium-Ignition-Coil-For-Nissan-Renault-UF-653-C1560-8200380267-/161616658388
Would like to try the NGK's 48031 U 5008 if I can find them? Would these work as well?
Thanks

[MJ310]

Joe
You need this type
http://www.ebay.co.uk/itm/PEUGEOT-CITRO ... Sw32lYwUQK
Then all you need to do is carefully cut off the shroud to match your existing coil and seal the gap with araldite or similar.

[Joe Cool]

Thanks for the link, but can you find a link for USA as I'm not having much luck on my end.
Guess these would also work ?
http://www.ebay.de/itm/NGK-Zundspule-48 ... SwdWBXPC1a

[MJ310]

Joe

Yes, they are the same coil. Just search for citroen V6 coils.