Re connect clutch cable

[Joshua_m]

Hello my fellow Mzriders, im hoping someone here wil be able to help me out, i had to disconnect my clutch cable to drop the engine now i got my engine back from the shop and i put it back in and re connected everything but reconnecting the clutch cable is giving me alot of problems. When i took the cable off i was able to slide it off of the little arm on the engine but no matter what i try im unable to reconnect it to the clutch arm mechanism. Thank you for your time and good luck.

[DAVID THOMPSON]

which mz size and model are you working on
2 stroke or 4 stroke

[Joshua_m]

2002 MZ SM 125

[DAVID THOMPSON]

will send a note with pictures some time sunday afternoon about the clutch adjustment
need to round up my tablet with a good camera and the shop manual
dave
there is an adjustment on the clutch basket that may have you fouled up

[DAVID THOMPSON]

pictures click on them to see bigger click 2 times makes them very big
.. pictures came out in reverse order to what i wanted 4321 4 is at top
1 tighten up adjuster nut at handlebar
so cable has full slack
pic 2 install cable at transmission may have to twist lever there toward front of bike
if it will not go on check cable routing

3 shows inside adjustment be careful about the spring and ball bearing in the spot marked on picture
in red
it is the OIL PRESSURE REG

4 use a side cover gasket to make a storage board for side cover screws there different lengths

dave

[Joshua_m]

With your excellent instruction i was able to re connect the cable in just 10 minutes thank you for taking the time out of your day to assist me. I wish you good luck with everything and god bless.

[DAVID THOMPSON]

thanks for the thumbs up..
coming up NOV 8th i have been the mod here 9 years

its been fun

except for the tons of spam we get but that seldom happens any more

what helps is when i see someone doing it in real time and erase him faster than he can post it

dave