MZ/MuZ Riders

by **JSC_SLP** » Wed Jan 04, 2006 12:33 pm

OK so I've decided to get PJ1 lube and kerosene to take care of my gunked up chain.
Question: How do I know if I have an "O-ring. X-ring, or standard chain?" It depends on what type of lube I would need to buy. PJ1 Blue (o-ring and x-ring) or Black (standard/ non o-ring) can.
If possible can you post a pic of a chain?

by **keithcross** » Wed Jan 04, 2006 1:30 pm

If you buy a chain lube suitable for o ring chains it will work fine for a standard chain.

Keith

by **whysub01** » Wed Jan 04, 2006 4:33 pm

Fit a Scotoiler, and never worry about chain lube again!!

by **keithcross** » Wed Jan 04, 2006 5:58 pm

A Scottoiler is definatly the way forward, been using one for 2½ years on my Baggi

Keith

by **cat** » Thu Jan 05, 2006 8:07 am

JSC_SLP wrote:OK so I've decided to get PJ1 lube and kerosene to take care of my gunked up chain.
Question: How do I know if I have an "O-ring. X-ring, or standard chain?" It depends on what type of lube I would need to buy. PJ1 Blue (o-ring and x-ring) or Black (standard/ non o-ring) can.
If possible can you post a pic of a chain?

Baghira comes with an o-ring chain. (afaik.)

If you're used to ordinary / non-o-ring chains, an o-ring chain will look like there's a slight space between the outer plates and the inner bushings. Look at yours and then look at a bicycle chain if you haven't got a 'normal' bike chain around to look at.

by **JSC_SLP** » Fri Jan 06, 2006 9:01 am

Great, thanks I think I'm all set.

MZ/MuZ Riders

Chain and lube

Chain and lube

Re: Chain and lube

Who is online